Na'urorin haɗi

  • Shirye-shiryen bidiyo na waya da panel shinge

    Shirye-shiryen bidiyo na waya da panel shinge

    Tsakiyar matsakaicin filastik ƙare filastik 4x40mm, 6x40mm 500mm 80mm 80mm 80mm 80mm 60x60mm Corner karfe matsa Karfe matsa 60x40mm 40 × 40,40 × 60,60x60mm tsakiyar filastik matsa Karfe matsa 60x40mm, 60x60mm 40x60mm tsakiyar filastik matsa C ...
  • Zagaye da madafunan murabba'i don matsayi na ƙarfe

    Zagaye da madafunan murabba'i don matsayi na ƙarfe

    Plastic Plastic Φ32mm,Φ34mm Φ38mm Φ38mm,Φ40mm Φ48mm,Φ60mm, Plastic Aluminum Φ32mm,Φ34mm Φ34mm Φ38mm,Φ40mm Φ48mm,Φ60mm, Plastic Galvanized 40x40mm,40x60mm, 71x71mm 60x60mm,80x80mm 91x91mm 101x101mm Plastic Copper plated 40x40mm,40x60mm, 71x71mm 60x60mm,80x80mm 91x91mm 101x101mm Φ48mm Foda shafi Φ60mm 71x71mm 91x91mm 101x101mm Φ38mm Bakin Karfe 71x71mm 91x91mm 101x101mm
  • Karfe strainers don tashin hankali waya

    Karfe strainers don tashin hankali waya

    StainerPlastic capSteel capBakin karfe capAluminium capSteel manne don panelPlastic clip don panelFixator don panelMultifuntional postTension mashaya

  • Hot tsoma galvanized Corner dutsen dutse

    Hot tsoma galvanized Corner dutsen dutse

    YL-AB8002 COMMON ANGLE BEAD MATERIAL: KARFE KARFE/GALVANIZED TSAYIN KARFE:2.4M,2.7M,3.0MW:45MM,50MM BUDE GIRMAN:12.5X25MM YL-AB1011 DRY WALLINGLE STEEL: ,2.7M,3.0MW:20MM B:3MM,5MM YL-AB1015 BUSHEN GANGON KWALLIYA MAI KWALLIYA: KARFE KARFE/GALVANIZED KARFE: 2.4M,2.7M, 3.0MW:25MM B:3MM,5MM METAL LAMTHAL-AB18 ABAYA: KARFE MARASA KARFE/TUSIN KARFE:2.5MW:0.6M KAuri:0.30MM,0.35MM,0.40MM,0.45MM ...
  • Shelf sasanninta

    Shelf sasanninta

    Bracket don allon katako,Ana amfani da shi a cikin gidan kayan aiki don adana sarari da sanya shi tsafta.

    Mun yi nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i)) na aiki mai nauyi da nauyi mai nauyi.

    Bambance-bambancen sune kauri na kayan abu da ɗaukar nauyi

    A saman za a iya galvanized ko foda shafi tare da launi daban-daban.

  • Bakin tukunyar fure

    Bakin tukunyar fure

    Bracket don tukunyar fure

    Yawancin ƙira don dacewa da amfani daban-daban.

    Samar da karfe sa'an nan surface foda shafi.

    Launi na iya zama baki, ruwan kasa, lemu, fari, launin toka.

     

  • ƙugiya masu rataye

    ƙugiya masu rataye

    Muna samar da nau'ikan ƙugiya daban-daban kuma za mu iya bin buƙatun abokin ciniki don yin sabon ƙira.

    A hooks samar da galvanized bututu, da diamita iya zama 12mm,18mm,20mm,25mm